Kathrein Euroline UFE 335, Руководство по эксплуатации

Страница: 27 / 39

Menu structure
27
Transponder search
In the transponder search, all programmes of the transponder are
searched for.
If the parameters (Satellite, Band, Symbol Rate, Free S.Rate) of the
searched programme are known, then the transponder search can be
used.
If e.g. a new programme is added to a known programme group, it is
sufficient to set a programme from this programme group before via
the programme selection – the required parameters are taken over by
the transponder search.
If the message „No signal!“ appears in the „START“ line, reception is
not possible. Please check the parameters satellite, frequency,
polarisation and symbol rate once more.
The search can be started, once „Signal!“ is displayed.
Start the search with the [OK] button.
Encrypted programmes are indicated with “ $ ”. Programmes, which
you do not want to include in the programme pool, can be individually
deleted by pressing the [TV] button.
New programmes are indicated with „ + “. These programmes are
added to the programme pool by pressing the [OK] button.
Manual entry (for experts)
If neither the satellite nor the transponder search finds the desired
programme, all important receiving parameters can be manually set in
“Manual Entry”. The manual entry is very helpful, when e.g. the de-
sired programme is known by the receiving data but is not continu-
ously transmitted.
Satellites
The satellite ASTRA is set at the factory. Another 7 satellites, e.g.
EUTELSAT/HOTBIRD, are pre-programmed. For extending your
receiving system, you can make the required settings for the
7 pre-programmed satellites in the ‚Satellite‘ menu.