Kathrein Euroline UFE 335, Руководство по эксплуатации

Страница: 11 / 39

Functions of remote control
11
Keep the button
“RC”
pressed.
Use the numbered buttons to input “902”.
In order to confirm the code, press
“RC”
, then switch receiver 2 to
standby by pressing

and then switch back on again. Also switch
on receiver 1.
Keep the button
“RC”
pressed and use the numbered buttons to
input “903”.
The remote control must point to the active receiver for the first two
settings.
You can now use the button
“RC”
to switch between the command
sets A and B (toggle function), operating the two receivers alternately.
Command set 1 is the factory pre-setting.
If you are only operating one receiver and the active command set
has been switched by mistake so that the receiver can no longer be
operated, it is easy to switch the remote control back to command set
1. This process has already been described above.
Note: The remote control help (explanation of the remote control) is not dis-
played if you are operating two receivers!