11 / 36
■
Re
fl
ector made of aluminium, powder coated
■
Feed system support made of galvanised sheet steel,
plastic coated
■
Mast clamp made of sheet steel, hot-dip galvanised
■
Optimal electrical data combined with very compact
mechanical dimensions due to offset feed
■
Patented tilt facility at the multi-feed adaptor plate, allows
optimisation of the LNB positions for multi-feed reception
■
Items supplied: Re
fl
ector, pre-assembled mast and
feed system support, allen wrench (size 5)
CAS
90gr
20010033
CAS
90ro
20010034
CAS
90ws
20010035
Offset parabolic antennas
Features
■
Without additional components, two universal feed systems
to receive the signals of satellites 3° or 4° (e.g. ASTRA
19.2°/23.5°) or 6° apart (e.g. ASTRA/EUTELSAT-HOTBIRD)
can be mounted on the boom
For any other combination, the ZAS 90 (BN 218684) multi-
feed adaptor plate (see below) is required in addition.
Proper use (use for the intended purpose)
The CAS 90 parabolic antenna is
intended solely for the reception of satellite signals
and for
use only as a domestic antenna
.
DIN 4131 speci
fi
es that a domestic antenna has no more than 6 m free mast length and a clamping torque up to 1650 Nm.
It is unsuitable for mounting on structures that are liable to vibration.
Make absolutely sure that the values for the maximum load listed in the Technical Data (on the last page) are complied with. If this load
is exceeded, parts could break away!
The CAS 90 parabolic antenna is designed for use with a feed system (LNB) for reception of the signals from one satellite position, or two
feed systems for multifeed applications for reception of the signals from two satellite positions with 3°-4° or 6° satellite spacing.
When the additional ZAS 90 multi-feed adaptor plate is used, the parabolic antenna is also suitable for three feed systems. The feed
systems and instructions for their installation are not included in the scope of supply of the parabolic antenna.
Do not use the parabolic antenna for purposes other than those listed in this manual! Any use other than that speci
fi
ed
above will invalidate the warranty or guarantee.
In particular,
never
•
modify
any of its
components
or
•
fi t any components other than
those expressly intended by the manufacturer for use with the antenna.
Breach of these rules may lead to the antenna no longer being suffi ciently stable and safe!
Optional accessories
■
ZAS 90 (BN 218684) multi-feed adaptor plate
Installation items 2 and 3 cannot be mounted at
the same time. Refer to the website (http://www.
kathrein.de/de/ sat/index_satpos.htm) to
fi
nd out
the elevation values for your location by means of
an azimuth/elevation calculation.
