manualshive.com logo in svg

Kathrein 9986492, Руководство по эксплуатации

Поделиться
Скачать
Kathrein 9986492 Скачать руководство пользователя страница 49

Return Path IF Menu 

 

49

Return Path IF Menu 

Return path IF menu 

In this menu, the video carriers -each 
according to optional assignment- can be 
measured on IF levels (38.9 MHz 
analogue and 36.15 MHz digital) or on the 
entire return path area (Optional return 
path card) from 4 MHz to 80 MHz.  

Each according to assignment, the 
MSK 33 answers with the IF menu or 
the optional return path menu (refer to 
star marking).  

Entering a frequency of 7.00 
MHz up to 80.00MHz*  

The return path frequency can be entered 
in with the numerical button, „0...9,“  with 
the cursor buttons, 

◄►

, in 50 kHz 

increments. The frequency is displayed in 
the lower left-hand corner.  

Inverting the RF spectrum*  

By pressing this button, he RF spectrum 
can be inverted. This mean, that the video 
and audio carrier for digital modulation, 
the I and Q vectors can be exchanged.  

 

ANALOG Menu 

Access the analogue menu with the buttons, “analog” and “RP MEAS-
URE.” In this menu, settings and measurements of analogue signal are 
possible (For further information, refer to the TV Analog menu).  

 

DIGITAL menu 

Access the digital menu with the buttons, “digit. DVB-C” and “RP 
MEASURE”. In this menu, settings and measurements of the DVB-C 
signals are possible. IF demodulation if DVB-T signals is also possible 
(For further information, refer to the TV digital menu). 

IF CONTROL menu (RP-CONTROL*) 

In this menu, all remotely controlled parameters, such as remote feeding voltage, 
22 kHz, DiSEqC, tone burst (simple DiSEqC), V-SEC, can be set (for further infor-
mation, refer to TV menu). 

 

 

ÍÎ

RP

frq

RF-inv

off 

➧

analog

>

IF (RP)
CONTROL

          I F
C O N T R O L

a n a l o g
          >

          I F
M E A S U R E

       

7 0

T V - I F 3 8 . 9 0 M H z   A 6 5 . 0 d B µ V

B A C K

         RP
C ON T R OL

d ig i t .
D VB - C >

         RP
M EA S U RE

       

7 0

R P   2 2 . 4 0   M H z   A   6 5 . 0 d B µ V

B A C K

 

  RP - i nv
       o ff

         RP
       f rq

RP

MEASURE

digit.
DVB-C> 

RP

MEASURE

Содержание 9986492





















































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды