4 / 36
• Attach the carrier arm to the antenna boom, as shown on the
drawing. Alternately tighten the wing nuts on the mast clip
fi
nger-tight (
).
c) Installing the carrier arm
d) Installation of the parabolic antenna
• Now hang the parabolic re
fl
ector from the four securing bolts
on the carrier arm (see the diagram on the right) (
).
• Now
lightly
tighten the four bolts using the hexagon key (do
this by holding the hexagon key by the short end, see diagram
on the right) (
+
).
• Now turn the hexagon key round. If you now swing the
long
end of the hexagon key (see diagram on the right)
through about a quarter of a turn, the bolts will be
tight
. If
you have a
torque wrench
available, tighten the bolts to
about
4-5 Nm
(
).
Tighten
lightly
!
First tighten
lightly
…
...then fully tighten
by about
1/4 turn
