Katalyst asurion uBreakiFix Fixture, Руководство пользователя

Страница: 33 / 33

Care Sanitizer Installation Guide
CARE SANITIZER DISPLAY (SHOP DESIGN VERSION)
STEP 1
Hang the slatwall brackets attached to the
display box onto the accessory wall.
STEP 2
Hang the product mounting bracket onto the
slot roughly centered in the display box.
STEP 3
Lift the bracket slightly and slide the slot in
the printed graphic over it.
STEP 4
Bend slightly, and secure the graphic into the
tabs on either side of the box. The graphic
should lie flat against the wall panels.
STEP 5
Remove the rubber feet from the Care
Sanitizer to expose the screw holes
underneath.
STEP 6
Using the provided screws, secure the Care
Sanitizer onto the display bracket.
STEP 1 STEP 2 STEP 3 & 4
STEP 5 STEP 6
OPTIONAL POWER
To run power to the Care Sanitizer, after step
2, drill a 1/2” hole located in the notch in the
bracket. Then install the power cord provided
with the product through the hole and
connect to a power strip as needed. Follow
steps 4-5 and then plug in the Care Sanitizer
prior to step 6.