Katadyn PowerSurvivor 40E, Руководство пользователя

Страница: 26 / 37

26
Drive Maintenance
After approximately every 1000 hours of use or when there is a suspect that salt water has entered
the housing, the eccentric drive should be opened for inspection, cleaning and lubrication.
Tools Needed:
¼” allen wrench (Torque wrench if available)
Hammer
Cape chisel
Flat chisel or medium flat blade screwdriver
Grease
Disassembly :
Disconnect the drive assembly from the pump
according to the instruction in section “Seal
Replacement, Disassembly”
Remove the seven ¼” hex bolts from the eccentric
drive assembly
Remove the housing front from the drive
assembly. You can use a cape chisel and a
hammer to hit from the pump flange side into the
groove.
Figure R-10
Figure R-11