LIFE:
The helmet’s life depends on the occurrence of different degenerative
factors, including changes in temperature, exposure to direct sunlight, the
more or less intense use. The helmet should be checked periodically, and
before each use, for the presence of any damage such as cracks, detachments,
deformation, peeling, which constitute evidence of a deterioration of the
helmet. Items that have been subjected to impact of sensitive entities must
be replaced even if they have no obvious signs of damage. In any case, it is
advisable to replace the helmet after 10 years from its production because
through time protection decreases due to aging of the materials. The date of
manufacture can be found inside the helmet.
INSPECTION:
In addition to the normal inspection before each use, a
responsible controller must carry out a thorough examination with at least
annual frequency. Audit logging must be done on a control board that contains
detailed references to: type, model, manufacturer’s data, batch or serial
number, date of purchase, maturity and first use, date of the inspection and
any notes. Do not remove labels or markings and check its legibility. If you
should find any cuts, abrasions, or other damage, contact the manufacturer to
have the helmet inspected before using it again. Remove discarded products
to prevent future use.
WARRANTY 3 YEARS:
KASK guarantees the product for 3 years from date
of purchase for defects in materials or workmanship. The warranty excludes
defects due to normal wear and tear, modifications, incorrect storage, improper
maintenance or use other than that for which the device has been certified.
LABELLING:
Information contained on the inside of the helmet, printed on a
label, which should not be removed for any reason.
EN
Содержание PLASMA AQ
Страница 1: ...USE AND CARE BOOKLET SAFETY HELMET FOR INDUSTRIAL USE EN 397 ...
Страница 65: ...NO OK Fig 1 NO ...
Страница 66: ...Fig 2 Fig 3 ...
Страница 67: ...Size adjustable 51 63 cm 20 1 24 8 inch Weight 390 g GR Fig 4 Fig 5 ...