Kashino Technology CSN-A1K, Руководство пользователя

Страница: 53 / 72

CSN-A1K User manual
53
/
72
m Print mode
1, 49 Partial cut (one point left uncut)
66
Feeds paper (cutting po [n
×
0.125 mm]), and cuts the paper
partially (one point left uncut).
[Notes for
①
and
②
]
 Cutting status is different, depending on the installed autocutter type.
 This command is effective only when processed at the beginning of a
line.
[Note for
①
] Only the partial cut is available; there is no full cut.
[Notes for
②
]

When n=0, the printer feeds the paper to the cutting position and
cuts it.
 When n≠0, the printer feeds the paper to (cutting p[n×0.125
mm (0.0049”)]) and cuts it.
ESC P m t1 t2 (for Drawer)
[Name] Generate pulse
[Format] ASCII: ESC p m t1 t2
Decimal: 27 112 m t1 t2
Hexadecimal: 1B 70 m t1 t2
[Range] m=0,1,48,49
0≤t1≤255, 0≤t2≤255
[Description] Outputs the pulse specified by t1 to connector pin m as follows:
m Function
0,48 Drawer kick-out connector pin2.
1,49 Drawer kick-out connector pin5.
[Note]  The pulse ON time is [t1×2ms] and the OFF time is [t2×2ms].
 If t2<t1, the OFF time is [t1×2ms].
ESC c 5 n(for buttons)
[Name] Enable/disable panel buttons
[Format] ASCII: ESC c 5 n
Decimal: 27 99 53 n
Hexadecimal: 1B 03 35 n
[Range] 0≤n≤255
[Description] Enable/disable panel buttons
（
support the panel buttons
）
 When the LSB of n is 0, the panel buttons are enabled.

When the LSB of n is 1, the panel buttons are disabled.
[Default] n=0