Kashino Technology CSN-A1K, Руководство пользователя

Страница: 50 / 72

CSN-A1K User manual
50
/
72
Decimal: 27 55 n1 n2 n3
Hexadecimal: 1B 37 n1 n2 n3
[Description]  Set “max heating dots”,” heating time”, “heating interval”
n1=0-255 Max printing dots, Unit(8dots),Default:7(64 dots)
n2=3-255 Heating time, Unit(10us),Default:80(800us)
n3=0-255 Heating interval, Unit(10us),Default:2(20us)
 The more max heating dots, the more peak current will cost when
printing, the faster printing speed. The max heating dots is 8*(n1+1)

The more heating time, the more density, but the slower printing
speed. If heating time is too short, blank page may occur.
 The more heating interval, the clearer, but the slower printing speed.
ESC 8 n1 n2
[Name] Sleep parameter
[Format] ASCII: ESC 8 n1 n2
Decimal: 27 56 n1 n2
Hexadecimal: 1B 38 n1 n2
[Description] Setting the time for control board to enter sleep mode.
n1+n2*256 The time waiting for sleep after printing finished, Unit
(Second), Default: 0 (don’t sleep).
When control board is in sleep mode, host must send one byte (0xff) to
wake up control board. And waiting 50ms, then send printing command
and data.
[Note] The command is useful when the system is powered by battery.
DC2 # n
[Name] Set printing density
[Format] ASCII: DC2 # n
Decimal: 18 35 n
Hexadecimal: 12 23 n
[Description] D4..D0 of n is used to set the printing density
Density is 50% + 5% * n(D4-D0)
D7..D5 of n is used to set the printing break time
Break time is n(D7-D5)*250us
DC2 T
[Name] Printing test page
[Format] ASCII: DC2 T
Decimal: 18 84
Hexadecimal: 12 54
[Description] Printing the test page