Kashino Technology CSN-A1K, Руководство пользователя

Страница: 29 / 72

CSN-A1K User manual
29
/
72
 It is possible to define multiple characters for consecutive character
codes. If only one character is desired, use c1=c2.
 d is the dot data for the characters. The dot pattern is in the horizontal
direction from the left side. Any remaining dots on the right side are
blank.
 The data to define user-defined characters is (y×x) bytes.
 Set a corresponding bit to 1 to print a dot or 0 not to print a dot.
 This command can define different user-defined character patterns for
each font. To select a font, use ESC !
 User-defined characters and a downloaded bit image cannot be
defined simultaneously. When this command is executed, the
downloaded bit image is cleared.
 The user-defined character definition is cleared when:
1
）
ESC @ is executed.
2 ） GS * is executed.
3
）
ESC ? is executed.
4 ） The power is turned off.
[Default] The internal character set
[Reference] ESC % , ESC ?
[Example] When Font A (12×24) is selected.