Kashino Technology CSN-A1K, Руководство пользователя, Страница: 36 / 72

CSN-A1K User manual
36
/
72
the excess data is not printed.
[Reference] GS *
GS v 0 m xL xH yL yH d1....dk
[Name] Print raster bit image
[Format] ASCII: GS v 0 m xL xH yL yH d1...dk
Decimal: 29 118 48 m xL xH yL yH d1...dk
Hexadecimal: 1D 76 30 m xL xH yL yH d1...dk
[Range] 0≤m≤3, 48≤m≤51
0≤xL≤255
0≤xH≤255, where 1≤(xL+xH×256)≤48
0≤yL≤255
0≤yH≤8, where 1≤(yL+yH×256)≤4095
0≤d≤255
k=(xL+xH×256)×(yL+yH×256) (k≠0)
[Description] Selects raster bit-image mode. The value of m selects the mode, as
follows:
m Mode
Vertical
Dot Density
Horizontal
Dot Density
0, 48 Normal 203.2 dpi 203.2 dpi
1, 49 Double-width 203.2 dpi 101.6 dpi
2, 50 Double-height 101.6 dpi 203.2 dpi
3, 51 Quadruple 101.6 dpi 101.6 dpi
 xL, xH, select the number of data bytes (xL+xH×256) in the
horizontal direction for the bit image.
 yL, yH, select the number of data bits (yL+yH×256) in the vertical
direction for the bit image.
[Note]

In standard mode, this command is effective only when there is no
data in the print buffer.
 This command is not affected by print modes (character size,
emphasized, double-strike, upside-down, underline, white/black
reverse printing, etc.) for raster bit image.

Data outside the printing area is read in and discarded on a
dot-by-dot basis.
 The position at which subsequent characters are to be printed for
raster bit image is specified by
HT (Horizontal Tab), ESC $ (Set
absolute print position), and GS L (Set left margin). If the position at
which subsequent characters are to be printed is a multiple of 8.
 The ESC a (Select justification) setting is also effective on raster bit
images.
 d indicates the bit-image data. Setting a bit to 1 print a dot and
setting it to 0 does not print a dot.