Kasei KZ-5121CS, Руководство оператора

Страница: 20 / 46

20
17
7.STARTING AND STOPPING
■
STARTING ENGINE
1. The chain brake should be activated when starting the chain saw.
Activate the chain brake by pushing the front hand guard forwards.
2. Press the oil cup repeatedly until fuel begins to fill the diaphragm
(about 3~6 times). The oil cup need not be completely filled.
3. Put the switch to “ON”position.
4.
Pulling out the chock knob, the chock is closed.
5.
Grip the front handle with your left hand. Put your right foot into the
boot grip through the lower section of the rear handle pressing the
machine against the ground.
6. Pull the starter handle with your right hand and pull out the starter
cord slowly (about 3~4 times)until you heard through a "puff"
sound.