LED3S19, LED6S19 WATERGLOW STAINLESS STEEL LIGHTING
MANUAL
884050 / 2021.1.2
2
Contents
Safety �����������������������������������������������������������������������������������������
Tools Required ����������������������������������������������������������������������������
Parts Included �����������������������������������������������������������������������������
Mounting Instructions �����������������������������������������������������������������
Maintenance Recommendations ������������������������������������������������
Warranty �������������������������������������������������������������������������������������
Repair �����������������������������������������������������������������������������������������
Non-Warranty Repairs ����������������������������������������������������������������
Troubleshooting Tips ������������������������������������������������������������������
Repair Contact Form �����������������������������������������������������������������
SAFETY
SAFETY
Please read and follow these important instructions to help ensure your safety and the quality performance of your Kasco equipment�
•
LEDS19 kit is 120Vac and MUST be plugged into a GFCI protected receptacle or GFCI protected field terminal connections.
•
LEDS19 fixtures MUST be properly submerged (to mark on housing) to avoid overheating;
insufficient submersion or operation
out of water will damage fixtures and void warranty.
•
Use caution when dealing with any electrical and/or moving equipment.
• Under NO CIRCUMSTANCES should anyone enter the water with the electrical equipment plugged in and/or in operation.
•
Kasco WaterGlow lighting kits are intended for use with a Listed control panel having a GFCI protected receptacle, or field wiring
terminals and disconnect switch, or a timer with a disconnect for use with a GFCI receptacle. They are intended to be mounted on
a floating fountain or aerator for use in a natural or man-made body of water to comply with NEC Article 682.
•
Kasco WaterGlow lighting kits have not been evaluated for use in swimming pools, spas or stationary fountains.
•
Use extreme caution around water, especially cold water, as in spring, fall, and winter, which poses a hazard in and of itself.
•
NEVER lift or drag the equipment by the power cords. If you need to pull the unit to the side of the pond, use the anchoring ropes.
•
Do not use boats that tip easily for lighting kit installation and follow all boating safety rules and regulations, including wearing a
PFD (Personal Flotation Device). Do not use waders in deep ponds/lakes or ponds/lakes with drop-offs, drastic slopes, or soft
bottom material�
•
For more information regarding your control panel instructions, refer to your equipment owner’s manual. A control panel must be
installed a minimum of 5 feet (3m in Canada) from the body of water unless separated from the body of water by a fence, wall, or
other permanent barrier that will make the unit inaccessible to persons in the water. A complete list of control panels can be found
section of
TOOLS REQUIRED
TOOLS REQUIRED
7/16” socket and driver or combination wrench