Kasco VFX Series, Руководство пользователя

Страница: 3 / 19

3
•
NEVER lift or drag the equipment by the power cords. If you need to pull the unit to the side of the pond, use the
anchoring ropes.
•
Do not use boats that tip easily for installation and follow all boating safety rules and regulations, including wearing a
PFD (Personal Flotation Device). Do not use waders in deep ponds/lakes or ponds/lakes with drop-offs, drastic
slopes, or soft bottom material.
•
For more information regarding your control panel instructions, refer to your control panel owner’s manual . A control
panel must be installed a minimum of 5 feet (3m in Canada) from the body of water unless separated from the body
of water by a fence, wall, or other permanent barrier that will make the unit inaccessible to persons in the water. A
complete list of control panels can be found in the Accessories section of kascomarine.com.
Additional Notes
During flotation operation, water is pulled from 360° around and directly below the unit. Keep these areas clear of debris as
much as possible to decrease frequency of screen cleaning.
Tools and Supplies Needed
•
(3) Anchors or stakes for installing unit
•
208/240VAC single-phase or 240VAC or 460VAC 3-phase electrical supply near pond on a post with room for
mounting the supplied control panel
•
(4) #10 x 1’’ long or longer screws for mounting the supplied control panel
•
9/16 ’’ socket with extension and ratchet
•
7/16 ’’ socket and ratchet or combination wrench
•
(3) 12’’ pieces of 1’’ galvanized pipe for weighting ropes (optional)
9/16 ’’ socket (extension not shown)
7/16 ’’ combination wrench
Unit Specs & Pattern Size