SM-100 SUSPENDED MOUNT MANUAL
9
1. Insert the end link of a short chain (H) between the mixer cage loops on one side of the cage.
2.
Secure the chain (H) with a 1/4”-20 x 3/4” shoulder screw (D), two 1/4” washers (F),
and 1/4”-20 locknut (E).
3. Repeat steps 1 and 2 for the other cage loop and short chain (H).
4. Tighten all locknuts until snug, without over-tightening.
5.
Insert one short chain loop (H) into an inner jaw slide (B) affixed to the stretcher bar (A).
6.
Secure with 1/4”-20 x 1/2” shoulder screw (C) and locknut (E).
7. Repeat steps 5 and 6 for the second inner jaw slide (B), fastening the chain (H) with another shoulder
screw (C) and locknut (E).
8. Tighten all locknuts until snug, without over-tightening.
STRETCHER BAR ASSEMBLY
C
H
B
E
5
E
H
C
A
B
6
E
F
F
H
D
1
2
7
Back to Contents