manualshive.com logo in svg
background image

2

 

CAUTION 

 

 

 

 

        

  NOTICE (NOTE)

These international safety symbols are used throughout this manual to inform the end user, installer, and owner of important safety 

information and notices for safe and effective use of the equipment.

Important Safety Instructions

 CAUTION

•  Under NO circumstances should anyone enter the water with the electrical equipment plugged in and/or in operation.  It is 

NEVER recommended to enter the water with the equipment in operation.

•  Caution should be used when dealing with any electrical equipment with moving parts.

•  NEVER run the unit out of water.  It will damage the seals and create a dangerous situation for the operator.

•  Extreme caution should be used around water, especially cold water, such as in Spring, Fall, and Winter, which poses a 

hazard in and of itself.

•  NEVER lift or drag the unit by the power or light cord.  If you need to pull the unit to the side of the pond, use the 

anchoring ropes.

• 

Do not use waders in deep ponds/lakes or ponds/lakes with drop-offs, drastic slopes, or soft bottom material.

•  Do not use boats that tip easily for fountain installation, such as a canoe, and follow all boating safety rules and 

regulations, including wearing a PFD. (Personal Flotation Device)

•  The unit is supplied with an internal grounding conductor.  To reduce the risk of electrical shock, be certain that the unit is 

plugged/connected to an approved RCD (GFCI) protected circuit.  

•  A properly sized 3 phase motor control (motor starter) with overload and short circuit protection must be provided at time 

of installation.

•  3 phase units (2.3, 3.3, 5.3) require a startup test after wiring to ensure proper rotation of the impeller.  If the impeller is 

rotating in the opposite direction, the unit will not perform properly and internal damage to the unit may occur.  (See 3 

phase startup procedure)

• 

Means for disconnection must be incorporated in the fixed wiring in accordance with local and national wiring rules to 

prevent accidental start.

• 

Consult a qualified electrician for electrical installation.

General description of equipment and function

Fountain/decorative aerator

Electrically driven submersible pump designed to improve water quality with water movement and aeration in a decorative display.

Intended use and limits of use

Kasco equipment is only intended for specific uses as detailed in this owner’s manual.  Intentional misuse could result in injury, dam

-

age to the product, and surrounding property.  

Intended uses are as follows:

Fountains/decorative aerators:  To provide aeration and a decorative display to ponds, lakes, and similar bodies of water.  Fountains 

and decorative aerators are provided with additional guarding to prevent accidental contact while operating.

Installation, adjustment, maintenance, and removal of this equipment should be limited to experienced maintenance persons or trained 

professionals.  If you are not sure how to install or operate any Kasco products call your local distributor, contact an electrician, or 

contact Kasco customer service at www.kascomarine.com for further assistance. 

Содержание 4400EJ
















Отзывы: