Kasanova HGK000002NOC, Инструкция по эксплуатации

Страница: 23 / 62

23
MULTIFUNCTIONAL STAND MIXER
PROBLEM EASY SOLUTION
Machine does not work
* There is a safety interlock switch on:
Bowl and its lid / blender / blender outlet lid / arm up
knob.
Make sure all of them are securely locked into position.
* If the motor still will not start, check the power cord and
power outlet.
Machine does not work
French Fried Potato Julienne Disk
* Always clear any blocked potato from the chipper disc
before processing more potatoes.
Some food remains on the disc after processing * It is normal for small pieces to remain after processing.
Motor slows down when mixing dough
* Amount of dough may exceed maximum capacity.
Remove half and process in two batches.
* Do not add more than 250g dough.
Dough is too dry
* Running machine and add water through feed cube, 1
tablespoon at a time until dough cleans the inside of the
processing bowl.
Dough is too wet
* Running machine and add flour through feed cube, 1
tablespoon at a time until dough cleans the inside of the
processing bowl.
Motor slow down when chopping blade
* Amount of meat may be too much.
Remove half and process in two batches.
* For the best result, trim the meat of fat before proces -
sing.
Vibrates/moves during processing
* Clean and dry the rubber feet at the bottom of the unit.
* Also make sure that the maximum load capacity is not
being exceeded.
TROUBLESHOOTING