6
2.4 - System Setup:
The System Setup menu is used to enable the required feeders or modes of operation. It is not
possible to select 'ENDFEEDER' and 'ONLINE' together as both devices share the same input
position (3.3)
END FEED. Enables the device specified in the End Feeder Select menu (2.2)
ONLINE. Indicates that the end feeder to be used does not need synchronisation.
Toggles each side station on and off respectively.
CANCEL. Deselects all feed options, including CLEAR if it has been selected.
CLEAR. Used to empty the machine at the end of a run. It can only be selected when all
feed stations are deselected and the ‘ON LINE’ sensor position is empty. (See 2.11).
TEST MODE. Used to set the machine and run a test envelope with documents. (See 2.7).
POST BATCH SETUP. Displays the Post Batch Setup screen. (See 2.5).
END FEED SETUP. Used to return to the End Feed Select menu (See 2.2). This can
only be achieved if the machine is cleared first.
Go to the System Status screen. (See 2.8).