9
2.7 - Test Mode:
Test mode is used to place one set of documents into an envelope, thus ensuring the machine is
set to produce correctly sealed envelopes. It can only be selected when the machine is not
running. The necessary side stations should be selected in the System Setup menu. ‘ONLINE’
should be selected in test mode if you require a document from the end feeder, not the end
feeder switch. After test mode has been completed the operator should then switch to end
feeder in order to run the machine.
In Test Mode Procedure the operator can choose whether to stop each document under its
double sensor or not.
Do not stop the machine to set the double switches.
Stop the machine at each selected side station to set its double switch.
Go to the Test Mode operation screen.
Go to the Test Mode End screen.