12
2.8 - System Status:
Flashes if a cover is lifted and the machine will stop if it is running.
SHEET STOP. This is used to send a signal to the end feeder to stop feeding.
SHEET START. This is used to send a signal to the end feeder to start feeding.
CYCLE START. This will start the machine.
CYCLE STOP. This will cause the machine to hold at the end of a cycle. It
will
NOT
stop the motor.
INCH. This will inch (jog) the machine.
Displays the Data Log Control screen. (See 2.10).
Displays the number of envelopes that have fed through the machine.
Displays the cycle speed of the machine.
Used to alter the speed of the machine. MIN – 0, MAX - 7.
Go to the System Setup screen. (See 2.4), or Operators screen (See 2.9)