Karmek KK IDRO, Руководство по эксплуатации и обслуживанию

Страница: 17 / 32

17
C. OPERATING INSTRUCTIONS
c.1 Initial warnings
All regulations, included those referring to national and European laws, must be respected when
installing the device.
Do not use the device as an incinerator or in any other way than that for which it was designed.
Do not use any fuel other than pellets.
Do not use liquid fuels.
The device, and its external surfaces specifically, reach an elevate temperature when working;
handle with care to avoid burns.
Do not perform any unauthorized alteration to the device.
Only use original spares, recommended by the building firm.
c.2 Introduction
The pellet boiler combines the heat of a flame with the comfort of an automatic management of the
temperature, of the lighting and the switching-off, with the possibility of a multiple days
programming. The automatic loading and the consistent capacity of the tank allow the pellet boiler
to perform automatically for a longer time, and they permit a better management of the device.
If the boiler reaches a temperature of 60°C inside the thermo chamber, it activates the provided
system circulator, permitting the diffusion of the heat inside the building. The lighting temperature
of the circulator can be modified. If the boiler exceeds by 10°C the set value and the temperature
keeps constant for a certain amount of time (defined by the building firm), the device will not
furthermore feed the flame. When the fumes’ temperature falls at a value defined by the building
firm, the boiler will automatically light the flame up again.
The boiler must always function with its door peremptorily closed.
It is necessary that outlet system of the flue gas be properly sealed.
To ensure a good efficiency and a correct functioning, it is necessary that the boiler is always
clean.