Karmann Ontario, Руководство по эксплуатации

Страница: 52 / 73

The sewage tank must be emptied
when indicator lamp B is illuminated.
The tank is then full up to approx. 15
litres. The remaining capacity is
sufficient for around 5 flushes.
Notes
Use original Thetford toilet paper or
another fast-dissolving paper.
Other papers may damage the
mechanism of the sewage tank.
Only use water and detergent to
clean the sanitary equipment. On
no account use cleaners which
contain vinegar or alcohol.
Remove the sewage tank (see next
page) and place it upright on the
ground. Swing the emptying nozzle
upwards and remove the cap.
Use the amount of sanitary chemical
recommended by the manufacturer
and add enough water until the
bottom of the tank is covered. Do not
on any account pour the chemical
directly into the toilet pan.
Follow the manufacturer's
instructions exactly when using the
chemical. Avoid overdosing at all
costs, as this could damage the
bacteria used in water authority
sewage plants.
Close the tank and return it to its
holder. If there is water in the fresh
water tank, the toilet can be used.
Water flush with fill level indicator
Activate the flush by pushing button
A. Water only flows for as long as the
button remains pressed.
Before using the toilet, activate the
flush briefly in order to allow some
water to enter the bowl.
After using, press lever C under the
bowl in an anticlockwise direction in
order to open the toilet bowl base and
operate the flush. Then return the
lever to its original position.
The waste is collected in the sewage
tank, which holds 17 litres.
D WATER SUPPLY AND DISPOSAL D
Toilet
7-5
C