Karmann Ontario, Руководство по эксплуатации

Страница: 28 / 73

Adjusting the table height
Loosen the knurled screw on the
column and push strongly where the
pedestal joints the hand, are the
bearings are off-entre. Hold the table
at the desired height and close the
screw. Please note that the toothing
latches when the screw is fully
inserted.
The tabletop must be supported with
folding feet A if it is used as part of
the bed. A gas pressure spring in the
column automatically returns the
tabletop to its original position after
release.
Dismantle Tabletop
The table can be rotated or completely
removed from the column by
loosening screw B.
The safety belts in the rear seating
group are fixed to a rail on the side
walls under the upholstery.
Note
A maximum of two pairs of belts can
be installed on each bench. Use an
authorised installer.
D LIVING ACCOMMODATION Ontario 600 H D
Table in the rear seating group
4-1
Safety belts in the rear
B
A A