Karmann Ontario, Руководство по эксплуатации

Страница: 47 / 73

6-4
D ELECTRICAL INSTALLATION D
Built-in halogen spots
The halogen spots are fitted with
halogen bulbs of different power
ratings.
To change the bulb, first switch the
power supply off.
The lamp glass is held by a
clamping ring. With a small
screwdriver, press this ring
together unit it can be levered over
the retaining lug.
Pull the halogen bulb out of its
holder.
When installing, proceed in reverse
order.
Rating of individual lamps:
Built-in light: 12 v / 10 W
Surface-mounted light: 12 v / 10 W
Wardrobe light:
12 v / 5 W
Alcove light: 12 v / 10 W
Halogen lamps
Alcove light
To change the bulb, switch off the
power supply.
Pull the head off the swan-neck and
the halogen bulb out its holder.
When installing proceed in the
reverse order.
Note
Do not touch the glass body of the
new bulb with unprotected fingers
because any fingerprints left on it can
considerably shorten its service life.
Caution
Do not turn the alcove light
towards the roof. Keep a safe
distance of 10 cm between the light
and all other objects, such as
bedding, for example.
Avoid creating hot spots which can
be caused by leaving top cupboard
doors near halogen spots open.
Too-long exposure to heat can lead
to discoloration of the door
surfaces.