Karma Saber GT Series, Руководство пользователя

Страница: 42 / 64

30
(Figure 6.1)
LFP battery
6.3.10. Connect the charger's cord to a power outlet.
6.3.11. Connect the charger's plug to the battery. Make sure the direction of
the plug is correct.
6.3.12. Turn on the charger by pressing the power switch. The charger's red
LED will light up if the AC power is normal.
6.3.13. The charger's orange LED will light up soon as the charging starts.
6.3.14. The orange LED will change to green when the charging is completed.
The digital display will show END. The charger will stop charging
automatically and turn off both voltage and current output.
6.3.15. For your safety, turn off the charger or disconnect the charger's cord
from the power outlet before taking the battery out.
(Figure 6.2)
CAUTION
●Before charging, make sure to set the 115V 230V switch to match the
local AC voltage. If the switch is improperly set to a lower or higher voltage
position, it will cause damage to the charger, and, Change the 115V
230V switch settings only when charger is disconnected from AC line
voltage.