Karma Saber GT Series, Руководство пользователя

Страница: 35 / 64

23
5.2.3.3 Use the Allen Key Wrench to loosen the screws. Remove the stopper
A. Adjust the armrest forwards or backwards and re-tighten the
screw. (Figure 5-15, Figure 5-16)
Note: If the armrest pad is adjusted to the backward position, use the
longer screw (M8*P1.25*55L).
5.2.3.4 Loose the knob screw. (Figure 5-17) Lift the seat. (Figure 5-18).
Loose screw A. Adjust the armrest inward or outward. (Figure 5-19)
While adjusting the seat width, ensure to align the number marked
on the armrest with the tube end of the frame tube. (Figure 5-20)
Figure 5.15 Figure 5.16 Figure 5.17
Figure 5.18 Figure 5.19 Figure 5.20
5.2.5 Driver's Seat Detachment
5.2.5.1 Detach the armrest which is equipped with the joystick controller.
(See Figure 5.21) Leave its cabling connected to the lower
body/electronics of the wheelchair.
5.2.5.2 Fold the driver's seat down/forward.
5.2.5.3 Loosen the knob bolt located under the front of the driver's seat.
(See Figure 5.22)
5.2.5.4 Remove the rear casing. (See Figure 5.23)
5.2.5.5 Remove the screws of the seat base bracket. (M6*25L x2) (See Figure
5.24)
5.2.5.6 Lift the driver's seat off of the lower body of the wheelchair. Lift the
front of the seat first, followed by the rear of the seat. The seat
detachment is completed. (See Figure 5.25)