Karma Saber GT Series, Руководство пользователя

Страница: 36 / 64

24
CAUTION
●Do not remove the driver's seat from the wheelchair without first
detaching the controller from the armrest or detaching the controller
with the armrest. KARMA is not responsible for damage to the cabling or
connection points caused by trying to remove the seat while the
controller is connected to the lower body of the wheelchair.
5.2.6 Driver's Seat Attachment
5.2.6.1 Place the rear of the seat into its receiving groove and then tilt the
front of the seat forward into position.
5.2.6.2 Please reverse the steps specified in the above section 5.2.5 Driver's
Seat Detachment to attach the driver's seat.
CAUTION
●The seat release lever must be in the locked position for the controller to
function. This safety sensor is designed to protect the user from having
the seat detached while in use. An error code will also flash if the seat
release lever is not in the proper position.
5.2.7 Moving the Seat Forwards or Backwards
5.2.7.1 Loosen the knob bolt under the front of the seat.
5.2.7.2 Tilt the seat back.
5.2.7.3. Loosen the four bolts under the driver's seat with the Allen Wrench
included in your KARMA Tool Kit. (See Figure 5.26)
5.2.7.4 Slide the seat forwards or backwards to the desired position. The
(Figure 5.21) (Figure 5.22) (Figure 5.23)
(Figure 5.24) (Figure 5.25)