Karibu Modern Bio Plug'n'Play, Руководство пользователя

Страница: 22 / 72

• 22 •
6 Quick start -
Evaporator mode
6.1 Switching on control unit
Switch on control unit in accordance with Chapter 4.1.
6.2 Evaporator mode
Evaporator mode only at temperatures below 65°C:
See Chapter 1 operating modes.
1. Set the desired temperature in the range
5
(40°-
65°C) with the control knob
4
. Mark the desired
temperature with a pencil mark, for example.
2. Set the evaporator power with the control knob
6
.
Mark the desired power stage with a pencil mark,
for example.
3. Briefly press the time button
9
(less than 2 seconds)
• The heating starts to heat up.
• The evaporator begins to work.
• The control light
1
lights up constantly.
The evaporator power is attained by briefly switching
the evaporator on and off. The time of switch-on and
switch-off is dependent on the power stage set.
6.3 Switching off the control unit
Switch off control unit in accordance with Chapter 4.2.
5 Quick start -
Sauna operation
5.1 Switching on control unit
Switch on control unit in accordance with Chapter 4.1.
5.2 Sauna operation
1. Set the desired temperature with the control knob
4
. Mark the desired temperature with a pencil mark,
for example.
2. Briefly press the time button
9
(for less than 2
seconds)
• The heating starts to heat up.
• The control light
2
illuminates constantly.
If the cabin temperature measured is less than the set
target temperature, the heater is triggered. The control
unit heats up.
If the measured cabin temperature is greater than the
set target temperature, the heater is not triggered.
5.3 Switching off the control unit
Switch off the control unit in accordance with Chapter
4.2.
Instructions for use - Figure
5