For Technical Support Call: 800-343-7486 Monday-Friday 7AM - 4 PM (PST)
Page 5
Assembly Instructions
–
40890
Step 1
–
Determine Distance Between Feet
•
On the roof of the
van, determine
desired mounting
locations. Measure
between the
locations. This
distance will
determine the
distance between
the cross bar
assemblies of the
rack. (Transit Roof
Shown)
Step 2
–
Assemble Side Channels
•
Assemble side channels using the front side
channel and the rear side channel. It does not
madder which side the combination of the two will
go on, just be sure to use the correct combinations.
The sheet metal brackets will align properly when
the correct parts are used. See picture.
•
Bolt using two 5/16 carriage bolts, two 5/16 flat
washers and two 5/16 nyloc nuts. Repeat for a total
of two rails assemblies.
**Be sure to apply BH-821 around tube connections**
