Kargo Master 40890, Инструкция по сборке

Страница: 2 / 11

For Technical Support Call: 800-343-7486 Monday-Friday 7AM - 4 PM (PST) Page 1
Assembly Instructions – 40890
*PLEASE READ ALL INSTRUCTIONS AND WARNINGS PRIOR TO ASSEMBLING,
INSTALLING, AND USING THIS PRODUCT*
Warning
Always check for wires, fuel tanks and lines, brake lines and other important vehicle
functionality items prior to drilling and installing all products.
Tools Needed
3/4 ” Socket and Wrench 9 /16” Socket and Wrench
5/16” Allen Hex Phillips Driver
Table of Contents
Parts List ................................................................................................................................... 3
Hardware ................................................................................................................................. 4
Assembly Instructions
Step 1 – Measure Distance Between Feet ............................................................................ 5
Step 2 – Assemble Side Channels .......................................................................................... 5
Step 3 – Assemble Rack ...................................................................................................... 6-7
Step 4 – Assemble Rear Roller Bar ........................................................................................ 8
Step 5 – Install Wind Deflector .............................................................................................. 9
Before You Begin
•
Read all instructions.
•
Be sure to put BH-821 sealant along swage joints and all threads connecting tubes
together. This is to help with water getting into the tubing and causing rust issues.
•
During installation onto vehicle, place sealant around all threads entering cargo area and
between the rubber spacer and roof of vehicle to prevent water from leaking into cargo
area.