For Technical Support Call: 800-343-7486 Monday-Friday 7AM - 4 PM (PST)
Page 6
Assembly Instructions
–
40890
Step 3
–
Assemble Rack
•
Assemble the rack as shown below.
•
Use the distances measured from step one to approximate where the cross bars should go.
•
Do not assemble any part of the rear roller bar assembly.
•
Once crossbars are in desired position, bolt caps
to crossbars using four 5/16” x 1” carriage
bolts, four 5/16” flat washers and four 5/16” nyloc nuts.
•
Snug Tighten, but allow movement. Adjustment will be needed when installing on vehicle.
