2/18
Mounting with either batteries or adapter
Choose a location to hang the dartboard where is about 10
feet (3.048 m) of open space in front of the board. The
“toe-line” should be 7’9 1/4” (2.37 M) from the face of the
dartboard. Since this dartboard is powered with either an AC
adapter or batteries, you could mount it anywhere or close to
an electronic outlet for convenience. Remove the batteries
when you use an adapter. No matter the dartboard has
horizontal or vertical hang hole(s), the center of bullseye
should be 5’8” (1.73 m) from the ground. Mark the center
location on the wall. Measure the distance between hang
hole(s) and center. Then, make the mark(s) for hang hole(s).
Make sure the second mark for hang hole is level with the
first mark. Mount the dartboard on the wall by lining up the
hang holes on the back with the screws. It may be necessary
to adjust the screws until the board fits snugly against the
wall. If you want to mount the dartboard even more securely
to the wall, you can fasten four screws through the holes
located in the catch ring area (the area outside the scoring
segments)
Dartboard Functions
(Please note that your dartboard may not include all functions)
POWER
switch/button - Located on the lower right corner on the side of the dartboard. Be sure the AC
Adapter is plugged into the jack on the right side of the dartboard or batteries are installed. Press the POWER
switch to turn game on or off.
START/HOL
D
button - This multi-function button is used to:
•
START the game when all options have been selected.
•
Put dartboard in HOLD status between rounds to allow player to remove darts from the target area.
GAME GUARD
button –After the START button has been pressed and play has begun, the GAME GUARD
feature can be activated. When the button is pressed, all of the keys will ‘lock’. When GAME GUARD is active,
a misguided dart hitting a button will not affecting your game. To deactivate the GAME GUARD, simply press
the button again and the keys will unlock.
BOUNCE OUT
button - Decide before play if you want to count darts that do not remain in board
(“bounce-outs”) or not. If not, simply press the BOUNCE OUT button immediately after a bounce out occurs to
deduct the score that registers
DART-OUT/SCORE
button - The DART-OUT feature is active only during the “01” games (301, 401, etc.).
When a player’s score falls below 160, he/she can press the DART OUT button to get a suggestion from the
dartboard as to the 3 darts needed to finish the game. Note: doubles and triples are indicated with 2 and 3
dashes to the left of the number respectively. The SCORE feature allows player to access score not current on
display.
