
43
MAKING A CALL WITH AN ACTIVE GSM DEVICE
1. The
Enblock
option should be activated.
2. When the handset is off hook and H/F is not active, the number is entered.
3. After entering the number, call is started by using 'BT Call' key. Thanks to this,
number can be called through the active GSM device.
NOTE:
When number is entered, if the
“Dial”
key, instead of the “BT Call” key, is pressed, the
call is done through exchange.
USING A BLUETOOTH HEADSET
1. Headset option is activated by using PHONE SETTINGS >HEADPHONE
menu. (“
With handsfree”
or
“Without handsfree”
option is selected.)
2. In order to make a call, there must be an active bluetooth headset, which is
connected to the ST30.
3. When
HF key is pressed, “Active HF Device” notification and headset icon are
displayed on the screen. Briefly, the screen goes back to the ‘Ready' mode
and dial tone is being received over the headset. After entering the number,
call is started.
NOTE:
After entering the number (when “Enblock” is active), if HF or
“Dial”
key is pressed,
call can be started.
4. If the HF key is pressed during
”With handsfree”
mode, then the rest of the
conversation goes on via the handsfree speaker. If the handset is lifted during
the same mode, then the rest of the conversation goes on via the handset.
5. When the headset option is in “With Handsfree” mode, the call control key on
the headset transfers the call into the H/F speaker. When the headset option
is in “Without Handsfree” mode, the same key ends the conversation.
6. The last number can be dialed through the ST30 with bluetooth headset if the
headset has “Redial” option.
Содержание ST30
Страница 1: ...GRAPHIC DISPLAY FEATURE TELEPHONE SET TECHNICAL REFERENCE AND USER GUIDE 04 2010...
Страница 2: ...GRAPHIC DISPLAY FEATURE TELEPHONE SET TECHNICAL REFERENCE AND USER GUIDE MAY 2010...
Страница 3: ......
Страница 54: ...GRAPHIC DISPLAY FEATURE TELEPHONE SET TECHNICAL REFERENCE AND USER GUIDE 05 2010...