
9
VOICE CONTROL KEYS
Control of voice features of ST30 are fulfilled by making use of four keys:
“
I
”
Key:
(Handsfree: It is a feature of telephone that it emits voices into the room or transmits
voices inside the room to the other parties while the handset is still on hook.) This is the
key with red icon that puts the telephone into the “handsfree” status and that signifies
this through an embedded LED. The key is called HF key, and the LED inside it is
called HF LED.
I
Key performs different functions in different cases. These are:
·
When it is pressed while the handset is on hook, the telephone is picked up as
“handsfree” and the HF LED lights. In this case, a number can be dialed and a
conversation can be made without lifting the handset. Pressing the key during a
conversation terminates the conversation.
·
The HF LED starts to blink if it is pressed while dial tone or busy tone is being
received over the handset or while a conversation is being made. If the handset is
replaced before the HF LED goes out, then one continues to receive dial tone or
busy tone, or one can go on with the conversation. The conversation is terminated
if the handset is replaced after the HF LED has become off.
·
If the handset is lifted during the handset status, then the rest of the conversation
goes on via the handset. Replacing the handset terminates the conversation.
·
While the handset is off hook, in the event that this key is pressed twice
consecutively, the other party can be heard both via the handset and the HF
speaker. The opposite party would hear the things spoken via the handset only,
but no voice would be transmitted to the opposite party via the HF speaker. The
conversation terminates by replacing the handset at this status.
·
If “Headset” usage has been activated through menu options, then this key may
also be used for putting the headset on line. Headset usage has been explained in
detail in the “Connection Points” section.
“
-
”
Key:
It is used to decrease the level of (H/F) voice received during conversation
while in the Handsfree mode. When the handset is off hook and H/F is not active, it is
used to decrease the level of voice received during conversation. When the headset is
on hook and H/F is not active, it used to decrease the level of the contrast. When the
bluetooth headset is active, it is used to decrease the voice level of headset.
Содержание ST30
Страница 1: ...GRAPHIC DISPLAY FEATURE TELEPHONE SET TECHNICAL REFERENCE AND USER GUIDE 04 2010...
Страница 2: ...GRAPHIC DISPLAY FEATURE TELEPHONE SET TECHNICAL REFERENCE AND USER GUIDE MAY 2010...
Страница 3: ......
Страница 54: ...GRAPHIC DISPLAY FEATURE TELEPHONE SET TECHNICAL REFERENCE AND USER GUIDE 05 2010...