Karel ST30, Техническое описание и руководство пользователя, Страница: 47 / 54

39
Status
This section is used to start or end the bluetooth connection.
By using ‘Enable’ menu , bluetooth option is activated on the ST30 and the bluetooth
icon is displayed on the screen.
By using ‘Disable’ menu , bluetooth option is cancelled on the ST30 and the bluetooth
icon is not displayed on the screen.
When Bluetooth status is enabled, in case the coverage area is out of range, the
connection is spontaneously ended. In this case, the active bluetooth icon on the
screen dims. When returned into the range, if the last paired device is an active GSM
device, the connection to this device is automatically performed; the bluetooth active
icon sharpens as well. (Most of the compatible headsets have already reconnection
facility, thus when returned into the bluetooth area, the connection request from ST30
telephone set will not be sent to these devices.) If the bluetooth connection is ended by
the GSM device, the connection request, for every 75 seconds, to this device which
appears in the “My Devices” menu is not sent. Once the connection is established, the
bluetooth connection is established without requesting the password for the second
time. (If the active device is inactivated with the connection from the mobile phone, the
device can not be accessed, which means the automatic reconnection will not be
realized.)
Search
This menu is used to search the devices within the range. Devices with Bluetooth
wireless technology within range start to appear on the display. In order to interrupt the
search, “Stop” option is enabled. The device list is frozen and one of the founded
devices can be connected from the list upon wish.
NOTE:
During searching, when “Stop” option is enabled, the list of founded devices appears
on the display. Thus, when pressed “Stop”, for a while, the telephone seems as if the
search still continues.
Select ; Desired device can be selected by this menu. If other device requires pairing
before connection, a password is requested. A password (1-16 characters long and
digital) is determined and the user of other device must be informed about it. If a
different password is used, the connection can not be established. This password will
be used only once, so there is no need to memorize it.
Bluetooth headset passwords may vary depending on headphone models. Therefore,
the headset password must be same with the ST30 bluetooth password for the
establishment of paired connection. (The default password identified as '0000' on most
headphone models but in different brands or models, password may have been
determined different. Password information can be accessed from the user guide of the
used headset.)