2
Safety Instructions
ATTENTION!
Do not use the accessory without having
read the instructions for use.
Please observe the safety instructions
of your pressure washer.
The T-Racer must not be used by
children.
Only trigger the gun of the pressure
washer if the T-Racer is located on the
surface to be cleaned.
There must be no persons in the
immediate vicinity of the cleaning head.
Turn off the pressure washer when
examining or changing the T-Racer and after
the completion of the cleaning operation.
Maximum water temperature allowed is
104 °F/ 60 °C. Please follow the
instructions for your pressure washer.
Included Accessories
T-Racer
Union nut
Handle
Extension tubes (2x)
Union nut
High-pressure nozzles (2x, grey)
The T-Racer can be used with all Kärcher
pressure washers with bajonet guns from the
model year 1992 up to 1850 PSI and Kärcher
gasoline pressure washers up to 2300 PSI.
The T-Racer is ideally suited for the
cleaning of floor and wall surfaces made of
materials such as wood, concrete, tile and
natural stone. It has not been designed for
commercial use.
Selection of the nozzles
For pressure washers with a pressure
from 1700 psi to 2300 psi.
➜
Use the
yellow
nozzles (premounted).
For pressure washers with a pressure
from 1200 psi to 1650 psi.
➜
Use the
grey
nozzles.
To ensure a trouble free operation of your
pressure washer you must replace the
two yellow nozzles with the grey nozzles.
Exchange of nozzles (2x)
1. Remove the clip
2. Pull out the yellow nozzle
3. Insert the grey nozzle
4. Re-insert the clip
English