3
Cleaning floor surfaces
Connect the T-Racer and the extension
tubes with the trigger gun.
Attaching the extension tubes
1. Press one extension tube into the bayo-
net catch of the trigger gun.
2. Turn it by 90° until it locks into place.
3. Tighten the union joint.
Repeat the above steps for the other two
connections.
CAUTION!
§
The T-Racer is not suited for scouring or
scrubbing!
§
Do not run over free-standing corners!
Cleaning wall surfaces
Connect the T-Racer directly with the trigger
gun.
Always hold the T-Racer with both
hands during the cleaning of walls.
Do not reach under the edge of the
T-Racer while the device is in operation.
English
Kärcher Customer Support USA
Call:
1-800-537-4129
for help
or visit our website:
www.karcher-usa.com
Kärcher Customer Service CDN
Call:
1-800-465-4980
for help
or visit
our website:
www.karcher.ca
