Kärcher SP 2 Flat, Руководство пользователя

Страница: 19 / 32

– 2
to transport or fasten the ap-
pliance.
 To separate the machine
from the mains, pull the plug
and not the power cord.
 Do not scrape the power cord
across sharp edges and en-
sure that it does not get
pressed.
 The voltage indicated on the
type plate must correspond to
the voltage of the electrical
source.
 To avoid risks, all repairs and
replacement of spare parts
may only be carried out by the
authorised customer service
personnel.
 Use electrical safety equip-
ment:
When pumping out swimming
pools, garden ponds and
fountains, only using a earth-
leakage circuit breaker with a
nominal leakage current of
max. 30 mA with the immer-
sion pump. Do not operate
the pump if there are persons
located in the swimming pool
or the garden pond.
For safety reasons, we rec-
ommend that you operate the
appliance only via a earth-
leakage circuit breaker (max.
30 mA).
In Austria pumps to be used
in swimming pools and gar-
den ponds should be
equipped with a fixed connec-
tion line according to ÖVE B/
EN 60555 Part 1 to 3; power
supply should be via a ÖVE-
tested isolating transformer
whereby the secondary nom-
inal voltage should not ex-
ceed 230V.
 This device is not intended for
use by persons (including
children) with reduced physi-
cal, sensory or mental abili-
ties or lacking experience
and/or knowledge, unless
they are supervised by a per-
son responsible for their safe-
ty or are instructed by these
persons on the use of the de-
vice. Children should be su-
pervised, to ensure that they
do not play with the device.
19 EN