Kärcher SGV 6/5, Руководство пользователя

Страница: 14 / 22

– 8
 Fold out the holder for the floor nozzle
(parking position).
 Remove the floor nozzle from the steam
suction pipe.
 Snap the steam suction pipe in the re-
tainer (bottom) and the holder (top) in a
way that the handle points outwards.
 Press the steam switch briefly. Self-
cleaning starts.
Self-cleaning proceeds automatically. Time
elapsed is displayed.
 Empty fresh water container.
 Empty detergent container (SGV 8/5).
 Empty and clean wastewater container.
 Thoroughly clean accessories: Clean
handle, steam suction hose and acces-
sory plug using a damp cloth. Clean the
remaining accessories under running
water.
 Clean the outside of the appliance with
a damp cloth.
 Press the locking mechanism of the ac-
cessory plug and pull the accessory
plug out of the accessory outlet.
 Allow accessories to dry sufficiently and
place them in the accessory tray.
 Empty fresh water container.
 Only SGV 8/5: Empty and clean deter-
gent container.
Illustration
 Store floor nozzle, steam suction pipes,
steam suction hose and power cable as
shown in the illustration.
 Remove all water from the appliance
prior to longer periods of non-use to
avoid offensive odours.
 Allow appliance to dry sufficiently:
Slightly pull out the wastewater, fresh
water, and detergent container and
open the cover of the accessory tray.
 Place the appliance in a dry room and
secure it from unauthorized use.
Note:
Always allow the brushes to cool
down so that any deformation of the bristles
is avoided.
Note:
Detergent residue or care emulsions
that are still present on the surface to be
cleaned can lead to streaks during steam
cleaning. However, these will disappear
with repeated cleaning procedures.
–
Elimination of odours and wrinkles from
hanging pieces of clothing, by steaming
them from a distance of 10-20 cm.
The closer you hold the nozzle to the dirty
spot, the higher the cleaning effect as tem-
perature and pressure of the steam reach
their maximum values immediately when
they are emitted from the nozzle.
–
The use of the detail nozzle is recom-
mended for hard to reach areas.
–
Treatment of stains on carpeted floors
or carpets prior to the use of the brush.
–
Cleaning of stainless steel, window
panes, mirrors and enamel surfaces.
–
Cleaning of corners on stairs, window
frames, door posts, aluminium profiles.
–
Cleaning of fittings.
–
Cleaning of window shutters, radiators,
interior cleaning of vehicles.
self-cleaning
see quickstart
start
self-cleaning
self-cleaning
# # # # _ _ _ _ _ _
self-cleaning
finished
After each operation
Storing the Appliance
How to use the accessories
Handle without accessories
Application examples
Detail nozzle
Application examples
27 EN