-
23
After 40
operating
hours or
once a
week
opinion
Tightness of sys-
tem
Check pumps and pipes for leaks. Inform Customer Service if there
is oil under the high pressure pump, if more than 3 drops of water
drop out of the high pressure pump when the pump is running.
Operator
opinion
Oil condition
Milky oil indicates that it contains water. Inform Customer Service.
Operator
opinion
Check oil level in
the high pressure
pumps
The oil level must lie between the MIN and MAX markings; else refill. Operator
opinion
Detergent hoses
with filter
Visual inspection of the high-pressure jet whether it contains deter-
gent. Clean the filter if necessary.
Operator
opinion
Entire plant
Check the functions of all wash programs.
Operator
opinion
Salt stock in the
salt tank
Is the salt level above the water level? If required, top up softening
salts.
Operator
opinion
Residual hard-
ness of softened
water
Draw water at the soft water test cock and check residual hardness.
Nominal value: below 10 °dH
Operator
opinion
Filter for frost-pro-
tection pump
Check filter for soiling and reinsert
Operator
Once, 1
month af-
ter start-up
Exchange filter
Fine filter WSO
Close the locking valve for fresh water (building site), unscrew the fil-
ter cup, replace the filter inlay, insert the new filter inlay and the filter
cup back into place, open locking valve for fresh water.
Operator
After 200
operating
hours or
once a
month
Check the oper-
ating pressure
High-pressure
pumps
The manometer must read 9...10 MPa (90...100 bars). Follow the in-
structions in the section "Help in the event of a malfunction" to repair
the defect if the reading is different.
Operator
Clean the filter
Cleaning agent fil-
ter
Remove filter and rinse it thoroughly with hot water.
Operator
Clean the filter
Filter for frost-pro-
tection pump
Clean the filter and replace
Operator
Clean the filter
Tool storage box
Clean the storage boxes.
Operator
opinion
Salt tank
Check water level (approx. 5 ... 25 cm above the sieve plate).
Operator
Check for deposits; if required, empty the tank, clean it, fill it up with
softening salts and start it up again. Risk of functional disturbances.
While filling the softening salts, use only the softening salt in the tab-
let form listed in the chapter "Accessories".
Operator
lubricate
Ceiling gyroscope Lubricate with grease gun on lubrication nipples (grease 6.288-
055.0)
Operator
Before the
frosting
period and
on monthly
basis dur-
ing the
frosting
period.
opinion
Quantity of frost
water protection
in the frost protec-
tion circuit
Target value: approx. 0.5 l/min per washing tool
Water quantity is higher: Change the node piece in the hand-spray
gun.
Water quantity is lesser Clean filter for frost protection pump; clean
sieve in throttle, clean pipes, check the rotation direction of the pump.
Operator
Quarterly
Clean the filter
Coin acceptor
Open the coin acceptor door. Clean the coin acceptor (see section
„Maintenance work“).
Operator
After 1000
operating
hours or
once every
six months
opinion
Pump head
Replace all valves when the valve heads are heavily pocketed.
Customer
Service
Oil change
High-pressure
pumps
See section "Maintenance work".
Operator
Exchange filter
Fine filter RO
Replace filter inlay; do not clean it.
Operator
Time
Activity
Assembly affect-
ed
Performance
By whom
61
EN
Содержание SB MU
