Kärcher SB MB, Руководство пользователя, Страница: 5 / 54

-
3
Foam Wash
Deep cleaning with active foam.
Only use foam brush when the programme
is running and after the high-pressure
wash.
Rinse
Rinse off shampoo and foam.
Distance of high pressure nozzle approx 50 cm.
Hot wax
Warm water with paint protection.
Use after rinsing.
Distance of high pressure nozzle approx 80 cm.
Top care
For Spot-free drying.
Demineralised water leaves a spot-free
high gloss finish.
Distance of high pressure nozzle approx 80 cm.
Dirt Loosening
Removes persistent dirt.
Warm water with special detergent.
Distance of high pressure nozzle approx 30 cm.
Micro emulsion, model A
Removes persistent dirt.
Warm water with special detergent.
Distance of high pressure nozzle approx 30 cm.
Micro emulsion, model B, with external
high pressure pump
Removing bitumen road coating residue.
Spraying a special detergent.
Insects Loosening
Loosens insects.
Warm water with special insect removing
detergent.
Distance of high pressure nozzle approx 30 cm.
Rim cleaning, model A, with dosing
pump
Loosens brake dust.
Warm water with special or increased de-
tergent addition.
Alkaline-based detergents only.
Distance of high pressure nozzle approx 30 cm.
Application before the car wash and only
on coated or painted wheels.
Rim cleaning, model B, with external
high pressure pump and mixing tank
Loosens brake dust.
Cold water with special high-dose deter-
gent addition while mixing in compressed
air.
Application before the car wash and only
on coated or painted wheels.
Intensive foam
Loosens persistent contamination.
Foam with special detergent addition.
Distance of foam nozzle approx 30 cm.
Under-chassis Wash
Removing coarse dirt from the underchas-
sis.
Washing cycle begins with a delay of ap-
prox. 10 seconds; drive the vehicle back-
wards and forwards over the under-chassis
wash.
1 Rest value display
2 Program selection switch
3 Throwing in the coin
1 Rest value display
2 Program selection switch
3 Throwing in the coin
 Select the washing programme using
the programme selection switch.
 Throw in the coin.
1 Washing brush
2 Locking lever
3 Hand spray gun
4 Lever for trigger gun
5 Safety lever
 Press the locking lever for washing us-
ing high-pressure jet; pull the washing
brush towards the rear and lock it in.
 To wash using the washing brush,
press the locking lever, push the wash-
ing brush forward and lock it in.
 Unlock the trigger gun and pull the lever
of the gun.
The hand-spray gun and washing brush
are available as separate tools.
Hand spray gun:
 Unlock the trigger gun and pull the lever
of the gun.
Washing brush:
 Clean the washing brush with the hand
spray gun prior to use.
 Set the washing programme "foam
wash" and clean the vehicle.
– Washing time starts after the coin is
thrown in.
– The remaining value display shows the
remaining washing credit in washing
units.
Note:
The washing time is running even if the pro-
gramme selector switch is in the "STOP"
position.
If more coins are thrown in during the wash-
ing time, the same are registered and add-
ed to the existing washing time.
Additional programmes (option)
Operations procedure
Single tool version
Double tool version (optional)
Washing time
5 EN