Kärcher MIC 50, Руководство пользователя, Страница: 59 / 342

English 59
4
Start the engine
6.11.5 Rear operating console for MIC 70
1
Rotary knob for front power lift lowering speed
2
Rotary knob for attachment release
3
Ignition lock
4
Additional socket-outlet, 12 V
Ignition lock
1
Engine off
2
Ignition on
3
Start the engine
6.11.6 Front power lift lowering throttle
1
"Increase lowering speed" rotation direction
2
"Decrease lowering speed" rotation direction
Turning in rotation direction 2 all the way to the limit stop locks
the front power lift.
The lowering speed of the front power lift can be set using the
lowering speed rotary knob.
Note
The function is needed for transport journeys on public roads in
order to disable the front power lift and thus the lowering of the
attachments.
6.11.7 Attachment release
1
Rotary knob for attachment release
Attachment release is used in order to move the load from one at-
tachment fitted on the front power lift towards the vehicle's front
axle.
Note
For a description of this, see chapter 8.5.4 Attachment release
and vibration dampening (optional).
7 Initial startup
몇
CAUTION
Read the operating instructions for attachments!
When using attachments or pulled devices and trailers prior to in-
itial startup, read the corresponding operating instructions and
follow them.
Pay attention to permissible loads, see chapter 15 Technical da-
ta.
7.1 Switching on the main switch
1
Main switch
2
Battery disconnected
3
Battery connected
1. To start the engine, put the main switch into the "battery con-
nected" position.
2. When the vehicle is parked, put the main switch into the "bat-
tery disconnected" position.
7.2 Safety check
 DANGER
Risk of accidents and injuries!
Do not start up the vehicle when one item of the safety check is
not fulfilled; make sure the item is repaired.
Check the operational and traffic safety of the vehicle before driv-
ing.