English
KM 100/40 W
8
Sweeping around barriers
Travel slowly toward the barrier.
•
Sweeping strap yields toward the
back.
Moving the machine in tight
passages
Pull slowly backwards towards
obstacle.
•
Sweeping strap yields toward the
front.
DISCONTINUATION OF USAGE
Please observe the following points
when the machine will not be used for
a lengthy period.
Park the sweep suction machine on
a level surface
Remove the master switch key
Lock the hand brake
Secure the sweeper-vacuum
cleaner against inadvertent rolling
Raise sweeping strap
Clean the sweep suction machine
internally and externally
Disconnect the batteries
Charge batteries at intervals of
approx. two months
TRANSPORTATION
Instructions for transportation
♦
The machine must be secured
against displacement during
transportation
Lock the hand brake
Secure the machine with stretch
belts or ropes
Secure the machine with wedges
on the wheels
Fastening areas
1. over the push handle
2. beneath the unit‘s cover
Note:
Observe markings for fastening areas
on base frame!
(chain symbols)
CLEANING AND CARE
Stand sweeper on a flat surface
Remove the master switch key
Lock the hand brake
Internal cleaning
Wear dust mask!
Wear safety goggles!
Blow-out with compressed air
Clean with a rag
External cleaning
Clean with a moist rag.
Note:
Do not use aggresive cleaning
agents!
MAINTENANCE INTERVALS
Elapsed-time meter
Elapsed-time meter indicates
maintenance interval times.
Maintenance by the customer
Daily maintenance
Check main brush and side brush
for wear and wrapped up straps
Inspect the tight fit of the bristle
clips and bristling on the sweeping
strap
Check voltage of the sweeping
strap
Check function of all controls and
indicator lamps
Maintenance every 50 operating
hours
Check voltage, wear, and function
of the drive belt
Check freedom of movement of
Bowden cables and moving parts
Check setting and wear of sealing
strips in sweeping area
Check sweeping pattern of the
main brush
Check voltage of the sweeping
strap
Check sweeping pattern of the
sweeping strap
Clean flat pleated filter
Measure battery voltage
Note:
All service and maintenance work, for
maintenance undertaken by the
customer, must be carried out by
qualified technical personnel.
A KÄRCHER specialist dealer can be
consulted at any time if required.
