English
KM 100/40 W
14
FAULT INDICATIONS
Machine will not start
Charge the battery
Check overload fuse
Notify KÄRCHER customer service
Motor running but machine not
moving
Set the Bowden cable to the driving
operation mode
Notify KÄRCHER customer service
Machine remains stationary on
inclines
Select flatter route
Check overload fuse
Notify KÄRCHER customer service
Machine not sweeping properly
Check the main brush and the
sweeping belt
Make the coarse dirt flap movable
Slacken the bowden cable of the
coarse-dirt flap (adjusting screw)
Check the tension and the function
of the belt, replace it, if necessary
Re-adjust main brush
Replace the sweep roller
Notify KÄRCHER customer service
Machine making dust
Make the coarse dirt flap movable
Slacken the bowden cable of the
coarse-dirt flap (adjusting screw)
De-dust or replace the dust filter
Empty debris container
Replace sealing profile on debris
container
Adjust or replace the sealing strip
Poor sweeping around the edges
Replace sweeping belt
Notify KÄRCHER customer service
Sweeping belt swivel mechanism
does not reset/operate
Insert locating plate correctly
Notify KÄRCHER customer service
Raising of sweeping belt does not
operate
Check the cable for the raising
mechanism
Engage deflection pulley
Notify KÄRCHER customer service
Sweeping strap gets severely
folded up while sweeping
Engage or replace relief spring of
sweeping belt.
Notify KÄRCHER customer service
Sweeping strap rotates with jerky
motion
Check the tension of the sweeping
belt.
Notify KÄRCHER customer service
TECHNICAL DATA
Unit data
Length x width x height
1240 x 690 x 1150 mm
Weight (without battery)
67 kg
Travel- and sweeping
speed
4 km/h
Climbing ability max.
15 %
Main brush diameter
265 mm
Sweeping strap length 500 mm
Surface performance 4000 m²/h
Working width without
sweeping strap
550 mm
Working width with
sweeping strap
990 mm
Volume of the swept
material container
40 Litres
Protection class
drip-proof
IPX 3
Engine
Type
permanent magnet
D.C. motor
Turning direction, right
Voltage
12 V
Rated current
50 A
Rated power
450 W
r.p.m.
2700-2800 1/min
Design
MP80S/3B14
Safety class
III
Type of protection
IP 20
Electric fuse protection
Central
50 A
Control
3 A
Deep-discharge
protection
via relays
Filter and suction system
Fine dust filter surface
2,1 m²
Filter utilisation classification
L
for non-health hazardous dusts
Rated vacuum of
suction system
5 mbar
Rated volumetric flow
of suction system
55 l/s
Vibrations of unit according to
ISO 5349 and ISO 2631-1
upper limbs
2,4 m/s²
Ambient conditions
Temperature
-5 - +40° C
Atmospheric humidity,
non-dew developing
0 - 90 %
Noise emission
Workplace related
Emission level according to
DIN EN 60704-1
at operating speed
67 dB (A)
