background image

                                                                      9

Observe regulations of water supplier.
For connection values, see type plate/tech-
nical data.

Use a fibre-reinforced water hose (not 
included) with a standard coupling. 
(Minimum diameter 1/2 inch (13 mm), 
minimum length 7.5 m).

Caution

Hose couplings made of metal with aquas-
top can damage the pump! Please use 
plastic couplings or KÄRCHER brass cou-
plings.

Illustration 
Screw the coupling element to the wa-
ter connection on the appliance.
Push the water supply hose onto the 
coupling unit, then connect it to the wa-
ter supply.

This high-pressure cleaner is suited to work 
with the KÄRCHER suction hose with back-
flow valve (Optional accessory, order no. 
4.440-238) to draw in surface water, e.g. 
from water butts or ponds (see specifica-
tions for max. suction height). 

Fill the KÄRCHER suction hose with 
backflow valve with water, screw to wa-
ter supply and hang into the water butt.

Appliance ventilation: Switch the appli-
ance on with the high-pressure hose 
detached and operate (max. 2 minutes) 
until the water exits the high-pressure 
connection without bubbles. Switch off 
appliance and reconnect high-pressure 
hose.

Caution

Dry runs lasting longer than two minutes 
lead to damages to the high pressure 
pump. If the appliance does not build up 
pressure within two minutes, switch it off 
and proceed as instructed in the Chapter 
"Troubleshooting".

Illustration 
Insert the high pressure hose tightly into 
the quick coupling on the appliance, it 
will lock in audibly.

Note:

 Make sure the connection nipple 

is aligned correctly.
Check the secure connection by pulling 
on the high pressure hose.

Illustration 
Push the spray lance into the trigger 
gun and fasten it by turning it through 
90°.

Completely open the water tap.

Insert the mains plug into the socket. 

Turn on the appliance “I/ON”.

Danger

The trigger gun is subjected to a recoil force 
when the water jet is discharged. Make 
sure that you have a firm footing and are 
also holding the trigger gun and spray lance 
firmly.

Caution

Prior to cleaning, make sure that the high 
pressure is placed safely on level ground. 
Wear protective goggles and protective 
clothing during the cleaning process.

Unlock the lever on the trigger gun.

Pull on the lever of the trigger gun; the 
device will switch on.

Note:

 Release the lever of the trigger gun; 

the device will switch off again. High pres-
sure remains in the system.

Carrying out the most common cleaning 
tasks. The work pressure can be infinitely 
regulated between "Min" and "Max".

Release the lever on the trigger gun.

Turn the spray lance to the desired po-
sition.

Note

: Suitable for working with detergent; 

for this, turn the spray lance to the "Mix" po-
sition. 

For particularly dirty items or areas.
Not suitable for use with detergents.

Caution

Car tyres, paint or sensitive surfaces such 
as wood should not be cleaned with the dirt 
blaster, as there is a risk of damage.

Water supply from mains

Drawing in water from open reservoirs

Start up

Operation

Spray lance with pressure regulation

Spray lance with Dirtblaster

Содержание K 7





























Отзывы: