Kärcher IVR-L 40/12-1, Инструкция по эксплуатации

Страница: 12 / 184

– 3
Illustration on the inside of the front
cover
1 Guiding rolls with fixed position brake
2 Drain hose
3 Marking maximum filling level, red
4 Push handle
5 Power cord
6 Suction head
7 ON/OFF switch
8 Suction hose connection
9 Lock
10 Deflector plate
11 Liquid reservoir
12 Accessories compartment
13 Unlocking lever
14 Tilting chassis
Illustration on the inside of the front
cover
 Bring the appliance to working position
- secure it, if required, with parking
brakes.

Ensure that the suction head has been
fitted properly.
Illustration
 Insert the suction hose into the suction
hose connection.
 Attach the desired accessories to the
suction hose.
Illustration on the inside of the front
cover

Insert the mains plug into the socket.
Illustration

Turning on the Appliance
 Start suction process.
Note: When vacuuming up fluids, only im-
merse the accessories half way in order to
deliver sufficient air.
Note: The red marking on the drain hose
shows the maximum admissible filling lev-
el.
Note: If the device is full, the mechanical
filling level switch-off terminates the vacu-
uming operation.
 Switch off the appliance and remove
the plug from the socket.
 Drive the appliance to the disposal site
for the liquid.
 Disconnect the drain hose at the upper
hose coupling.
 Hold the drain hose over a suitable col-
lection unit and drain the content.
 Dispose of the contents according to
the local provisions.
Device elements
Start up
Operation
Check the fill level display
Empty the liquid container.
12 EN