Kärcher ID 30/30 Afc, Перевод оригинального руководства по эксплуатации

Страница: 25 / 49

Maintenance/Repair
25/49
Maintenance/Repair
Maintenance regulations
NOTICE
Suitable work gloves must always be worn when carrying out maintenance and service tasks,
in order to prevent injuries and soiling with contaminated substances
Before starting work remove the plug from the wall socket!
Respiratory protection (EN 149:2001)
Use protective glasses (acc. to DIN EN 166 1349-BT)
Use protective clothing (acc. to EN 13982-1)
Only use with safety shoes (acc. to EN ISO 20345)
• Careful and periodical inspections and maintenance works are necessary to enable an early detection
and elimination of possible errors before they cause bigger problems and damages.
• Ringler assumes liability and guarantee only in case of proper use and compliance with the following
maintenance instructions.
• The operational reliability of the industrial vacuum cleaner can only be maintained if original or
approved spare parts are used exclusively for all maintenance and repairs.
•
For maintenance by the user the device must be disassembled, cleaned and maintained, as far as
practicable, without causing danger for the maintenance personnel or other people. Appropriate
precautions include cleaning before disassembly, providing for filtered forced venting in the location
where the device is disassembled, cleaning the maintenance area and wearing suitable personal
protective equipment.
• The manufacturer or a trained person must carry out a technical inspection at least once a year, which
comprises, for example, inspection of the filters for damage, checking the machine for leaks and
checking correct functioning of the control device.
• When performing maintenance or repair work, all contaminated objects which cannot be satisfactorily
cleaned must be disposed of. Such objects must be disposed of in impervious bags, in compliance
with the valid regulations for the elimination of such waste. All machine parts must be considered
contaminated when removed from the hazardous area, and appropriate measures must be taken to
avoid dust distribution.
• For machines in category "H" and "M" the outside of the machine should be vacuumed and wiped
clean or treated with sealants, before being removed from the hazardous area.
• When replacing or repairs the facility all earth conductors are connected again!