Kärcher HDS 655 M Eco, Инструкция по эксплуатации

Страница: 31 / 36

English
31
! Check water supply, check connec-
tions, clean water shortage safeguard.
– Fuel filter dirty
! Change fuel filter.
– Direction of rotation is wrong. With cor-
rect direction of rotation a strong airflow
can be felt out of the exhaust opening of
the burner.
Figure 16
! Check direction of rotation. Exchange
the poles at the device plug, if required.
– No ignition spark
! If device is in use and no ignition spark
can be seen through the viewing glas,
have device checked by customer serv-
ice.
– Working pressure/flow rate to high
! Reduce working pressure/flow rate
through regulating spindle (Figure 9).
– Sooty heating spiral
! Have device de-sooted by customer
service.
If malfunction can not be fixed, the de-
vice must be checked by customer serv-
ice.
– The warranty terms published by our
competent sales company are applica-
ble in each country. We will repair po-
tential failures of the appliance within
the warranty period free of charge, pro-
vided that such failure is caused by
faulty material or defects in fabrication.
– The warranty comes only into effect if
your vender fills out the supplied reply
card completely at purchase, stamps
and signs and you send it to the local
distribution company of your country.
– In the event of a warranty claim please
contact your dealer or the nearest au-
thorized Customer Service centre.
Please submit the appliance, including
all accessories, and the proof of pur-
chase.
– Only use accessories and spare parts
which have been approved by the man-
ufacturer. The exclusive use of original
accessories and original spare parts
ensures that the appliance can be oper-
ated safely and troublefree.
– At the end of the operating instructions
you will find a selected list of spare parts
that are often required.
– For additional information about spare
parts, please go to the Service section
at www.kaercher.com.
Set temperature is not achieved
while using hot water
Warranty
Accessories and Spare Parts