Kärcher HDS 655 M Eco, Инструкция по эксплуатации

Страница: 27 / 36

English
27
Note
Recommended value at maximum working
pressure.
! set pressure/temperature and deter-
gent concentration according to the sur-
face to be cleaned.
Note
To prevent damage due to too much pres-
sure, always position high pressure ray first
from a greater distance towards object to
be cleaned.
The spray angle is essential for the effec-
tiveness of the high pressure ray. Normally
work is performed with a 25° flat ray nozzle
(included).
" Recommended nozzles are deliverable
as accessories
– For strong contaminations
0° full ray - nozzle
– For sensitive surfaces and light contam-
inations
40° flat ray - nozzle
– For thick layered, persistent contamina-
tions
Dirt grinder
– Nozzle with adjustable spray angle, for
adaption to different cleaning tasks
Angle-Vario-Nozzle
– Loosen the dirt:
!
Spray detergent economically and let it
work for 1...5 minutes but do not let it
dry up.
– Remove the dirt:
! Spray off loosened dirt with the high-
pressure ray.
Removal of light contaminations and clear
rinse, i.e.: Gardening tools, terrace, tools,
etc.
! Set operating pressure according to
need.
! Set temperature regulator to “0”.
m
Danger
Scalding danger!
!
Set temperature regulator to desired
temperature.
We recommend the following cleaning tem-
peratures:
–
Light contaminations
30-50 °C
– Contaminations containing protein, i.e.
in the food processing industry
max. 60 °C
– Vehicle cleaning, machine cleaning
60-90 °C
m
Danger
Scalding danger! When operating with tem-
peratures above 98 °C, the operating pres-
sure must not exceed 3.2 MPa (HDS 1195:
2.8 MPa) .
Therefore the following measures must
definitely be performed:
m
!
Replace the high pressure nozzle
with the steam nozzle.
! Open up the pressure/ quantity regula-
tor on the hand spray gun completely,
dir until stop.
! Set the operating pressure on the appli-
ance to the minimum value.
!
Set temperature regulator to min. 100
°C.
m
Danger
Scalding danger!
We recommend the following cleaning tem-
peratures:
Cleaning
Working with the high pressure nozzle
Recommended cleaning method
Operating with cold water
Operating with hot water
Operating with steam
Order No. Type
4.766-023 HDS Super M / MX Eco
HDS 655 M Eco
HDS 695 M / MX Eco
HDS 895 M / MX Eco
4.766-024 HDS 1195 S / SX Eco